您在這裡

FAQ

How is combo port priority configured?


Answer:

The combo port priority can only be configured via CLI from the serial port of the switch or through Telnet. The copper port is the first priority by default.

  1. Connect PC and EtherWAN switch via DB9 console cable
  2. Open terminal emulation program (Putty, HyperTerminal, etc.)
  3. Baud rate: 115200, Data bits: 8, Stop bits: 1, Parity: none
  4. If using Telnet, open your telnet application and connect to the IP address of the Switch.

 Type following commands:

 switch_a login: root
 switch_a>enable
 switch_a#configure terminal
 switch_a(config)#interface ge1
 switch_a(config-if)#combo-port priority copper
 switch_a(config-if)#exit
 switch_a(config)#exit
 switch_a#copy running-config startup-config

 

combo_port_priority.gif